產品名稱:愛斯佩克ESPEC高溫箱ST-110B1
產品型號:
更新時間:2024-08-18
產品簡介:
中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友儀器JETYOO INSTRUMENTS,專業為中國區用戶提供愛斯佩克ESPEC高溫箱ST-110B1
中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友儀器JETYOO INSTRUMENTS,專業為中國區用戶提供愛斯佩克ESPEC高溫箱ST-110B1儀器設備、技術培訓與售后維修服務,Support、銷售Sale、服務Service,3S公司,為上海華東地區一家以技術為導向的儀器綜合服務商,是您值得信賴的電子行業儀器專家。
DESKTOP TYPE HIGH-TEMPERATURE CHAMBER愛斯佩克ESPEC高溫箱性能Performance
型號 Model 愛斯佩克ESPEC高溫箱ST-110B1/B2 ST-120B1/B2 STH-120
循環方式 Circulation mode 強制熱風循環換氣方式 Forced hot-air circulaton & ventilation system
電源 Power supply AC220V 單相 50Hz AC 220VSingle-phase 50Hz
工作環境溫度 Operating temperature +5℃~+35℃
溫度范圍 Temperature range
環境溫度+20℃~+200℃
Ambient temperature +20℃~+200 ℃
環境溫度+20℃~+300℃
Ambient temperature
+20 ℃~+300 ℃
溫度波動度 Temperature fl uctuations ±0.3℃
溫度分布Temperature distribution
±0.5℃(at+100℃)
±1.5℃(at+200℃)
±1.0℃(at+100℃)
±1.5℃(at+200℃)
±2.5℃(at+300℃)
溫度上升時間Temperature heat-up rate
環境溫度~+200℃ 30分鐘以內
Ambient temperature~+200 ℃ Within 30minutes
環境溫度~+300℃ 60分鐘以內
Ambient temperature~+300 ℃
Within 60 minutes
安全保護裝置 Safety devices
電源用漏電斷路器/溫度保險絲/門開關/溫度調節異常警報
Leakage circuit breaker for power supply/Temperature fuse/Door switch/Abnormal temperature adjustment alarm
送風機溫度開關/上限溫度警報,下限溫度警報/傳感器斷線檢測
Temperature switch of motor/ Upper temperature alarm/Lower temperature alarm/Sensor wire-cut inspection
控制回路短路保險絲/自動溫
度過熱防止
Control Circuit short circuit protection fuse/Automatic over-heat protector
裝備品 Fitting
分離型計裝、換氣擋板、電纜孔(25mm)
Separated meter ,ventilation blocking board and cable port hole(25mm)
內容積 Inside capacity(L) 15 39 28
內部尺寸 Inside dimensions
W×H×D(mm) 220×280×250 400×280×350 360×240×330
外部尺寸Outside dimensions
W×H×D(mm) 300×435×540 480×435×640
重量 Weight(kg) 25(B1) / 23(B2) 35(B1) / 33(B2)
說明補充
*1: 在環境溫度為+23℃,無試樣、換氣擋板全閉的狀態條件下測得的數值;B1規格、STH-120為標準風速狀態;
Data measured at the environment temperature of +23℃ without sample and in the state of full closing of ventilation blocking board; For the specifications of B1, STH-120,
the data is measured in the state of standard wind velocity.
*2: 性能基準根據日本JTM-K05;
JTM-K05 of Japan is taken as the standard performance.
*3: 不包括突起部分。
The protrusive part is not included.